The electric roof seaming machine M1008 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:
Galvanized steel: 0.75mm
Aluminium: 0.8mm
Copper: 0.8mm
Zinc: 0.8mm
Other characteristics:
Adjustable for different seaming heights (min. height 25 mm)
Weight: 7.50 kg
Profiles straight from start of strips - can also be used for small roof surfaces as well as slanting, angular and off-set elements
Even allows for profiling on narrow surfaces: minimum distance from seam centre to seam centre (bay width) about 80 mm
Simple removal of the tool from seam by relieving pressure – at any time and without scratching
For round roof surfaces (domed roofs) down to min. radius of 2 m
Smaller radius (min. 0.8 m/32″) by using a round rail
The electric roof seaming machine M1006 is an ideal tool for closing the single or double-lock standing seam at the workshop as well as for the site. It could lock a large range of metal:
Galvanized steel: 0.75mm
Aluminium: 0.8mm
Copper: 0.8mm
Zinc: 0.8mm
Other characteristics:
Adjustable for different seaming heights (min. height 25 mm)
Weight: 5.30 kg
Closes straight from start of trays – can also be used for small roof surfaces, slanting, angular and off-set elements
Simple removal of the tool from seam by relieving pressure – at any time and without scratching
For round roof surfaces (domed roofs) down to min. radius of 0.2 m
